Monday 3 October 2016

The Printable Craft Shop Halloween Card - 2 versions

Hello all,

Well I am back from my holiday in Florida all ready for Halloween - its my favourite season, I love horror films and halloween and any thing scare, so I loved this project.

I used all items from The Printable Craft Shop, and used the witches shoes as my project.  There are loads of fabulous options on there for card making, pop along and have a browse, you wont be disappointed.

www.printable-craftshop.com.

https://www.facebook.com/groups/MyCraftsCommunity/

I printed off the base card and the topper sheet twice (for two projects), I made the first project as it was meant to be made.

I printed out and cut out all elements and scored down the centre of the shoe which is my base card.






I layered up the shoe topper and the buckle belt on the front of the card.


I layered up the two green shoes and the sock toppers on the inside of the card.


For my alternative card, again I printed and cut out all elements.  But this time I cut the shoe in half as I only need the front of the shoe.  I added a piece of A4 black card and A5 orange card, and matt and layered these together.



I added the shoe to the front of the card with foam pads to raise it.


I added the shoe topper and buckle to the shoe, again with foam pads to raise it up.


I finished the card with some black ribbon.


 TTFN, Happy Crafting

Debs x

Monday 22 August 2016

Pop Up Box Car - Alternative - The Printable Craft Shop

Hello all,

Today I worked on my alternative card from The Printable Craft Shop, I used the following card kits.

Hello Sunshine Shadow Box Card
Purple and White Flower Topper Sheet
Butterfly Slider Card

You can purchase and down load these kits from The Printable Craft Shop - link below.

.www.printable-craftshop.com.

I started with the backing paper for Hello Sunshine (which you can print double sided or you can print two sheets and matt and layer - I recommend  at least 250 gsm card stock for this) and scored this at 7 cm, 14 cm, 21 cm, 28 cm and turned and scored at 12 cm.


 Using a 2nd sheet I created layers for the inside of the card which you would see folded over, for each small panel they are 7 x 12 cm and for long panel 7 x 21.5 cm and who thin strips (for the central panels inside the box card to hold your flowers) 10.5 x 2 cm.
 On your A4 scored sheet, cut down the top score lines to the 12 cm score line, the small panel which is left, again cut down to the 12 cm score line then cut this off.  I generally cut the corner at an angle so when you stick together you get a clean finish.

To make up the box, taken the small tab on the left side and stick to the inside of the right side, forming a box.


score the two thin panels at 1.5 cm from each end and stick inside the top of the box.


I printed out the topper sheets for Hello Sunshine and Purple and White Flower topper sheet and Butterfly slider card and cut into them and cut out all the flowers, the butterfly and the tags an oval topper.  I used these to decorate my pop up box by sticking the flowers to the two central panels we added earlier.





I stick these to the inside panels, sides and back of the pop up box card.  Giving you the finished card below.






Beautiful for any occasion.

Please join me for my next project - coming soon.

TTFN, Happy Crafting.

Debs

Friday 19 August 2016

Perfect Roses Asymmetrical Card - Alternative Version - The Printable Craft Shop

Hello again,

I have been playing with the card base, topper and insert sheet from this card kit from The Printable Craft Shop,

www.printable-craftshop.com.

I love this design and pattern, the colours are vibrant and so pretty.

I have used the card base, topper sheet and the insert sheet and have made a detachable bookmark card - with a perforated section so you can tear off the book mark and keep it and use it.

I started by printing off the sheets I wanted to use on 200 gsm card stock and used a piece of white card stock 300 gsm as a base.  I cut this down to 16 3/4 cm high and scored the width so I had a 17 12 cm back panel and shorted front panel so you can see the book mark element of the card.

I cut out all elements from the insert sheet and cut off the blue panel on the right hand side to use on the reverse of the card, the middle panel I used as an insert for the inside of the card, and the panel on the left to put on the reverse of the front panel so it was decorated also.
 I cut out all elements from the topper sheet, the decoupage for the front of the card the blue border strip for the inside book mark.
 I cut off the flower panel section and put the rest aside to use on a future project.
This is the front of the card showing the flower panel with decoupaged elements and the book mark on the right side.
 I have added glitter and liquid pears to show butterfly trails down the card.

 The inside of the card has a lovely oval panel so you can write your sentiments and the tear off book mark is on the right.
 The book mark section is perforated for easy removal.
 The back of the card is decorated so the book mark is double sided and the patterned panel is used for decorating the rest of the back panel.

Once the book mark is removed the card still remains a full card as the front and back will line up perfectly so can still be displayed as a card whilst you are using your book mark separately.

I love this card and it is so easy to make and looks stunning.

TTFN, happy crafting.

Debs x

Butterfly Side Slider Fold Card - The Printable Craft Shop

Hello again,

It's my third project of the day for The Printable Craft Shop, this time I am using the Butterfly Side Slider Fold Card kit which you can purchase and down load from The Printable Craft Shop.

www.printable-craftshop.com.

It is such a summery card, so cheerful.

I started by printing out all elements on to good quality 250 gsm card stock to give it a sturdy base.

This is the topper sheet.

 This is the base card and slider element.

I ct out all elements and cut out the tabs where indicated on the card and toppers.
 I then started to layer up all elements onto the card, the large topper on to the inside of the card, the front of the card is folded back and I have stuck the two pieces of the slider tabs together to form a double sided slider and stuck this behind the front fold back of the card an through the cut out tab on the front of the card through to the inside of the car and layered a butterfly on this so it is raised off the card and appears to be flying.

I stuck the oval topper on to the front of the card and finished with the two tags in the top left corner and added glitter and pearl drops in the corners.




I hope you like this.  All items can be purchased from The Printable Craft Shop.

The next project will be combining this kit, along with Hello Sunshine kit and the Perfect Roses Asymmetrical kit and finally the purple and white flower toppers - I will be making a stunning card using elements of all 4 of these kits.

TTFN, Happy Crafting.

Debs x

Perfect Roses Asymmetrical Card - The Printable Craft Shop

hello all,

My 2nd project for The Printable Craft Shop is a lovely card with beautiful roses, it is such a pretty card.

www.printable-craftshop.com.

I started by printing out all elements needed from The Printable Craft Shop on good quality card stock, I chose 250 gsm card to give me a solid base.




 I cut all the elements out and scored where indicated by the red line.


Using the base card, I lined the inside with the oval/side panel topper sheet, and the inside left with the matching patterned paper.
 I added the matching topper to the front of the car and layered up the decoupage elements.
 I added glitter to finish.

Using the envelope printed elements, cut these out and score where indicated by the red lines.




Stick the side and bottom flaps down and your envelope is complete.

Thank you for looking.  Please look out for my next project - coming soon.

TTFN, happy crafting.

Debs x